Overview
Installation
Operation
Maintenance
Warranty
Description
1. Important recommendations
1.1. Safety directives
Installation and commissioning work on thermodynamic water-heaters may pose hazards because of high-
pressure and live electrical parts.
Thermodynamic water heaters must be installed, brought into service and maintained by trained and
qualified personnel only.
1.2. Transport and storage
The product may be turned through 90° on one side. The side permitted is
shown clearly on an information label placed on the product packaging. The
product must not be turned on the other sides. An inclination indicator is used
to check that the product has been transported and handled in accordance
with our recommendations. We recommend you should be careful to respect
these instructions. Our commercial warranty will not apply if the inclination
indicator is red. We will not be responsible for any fault in the product
resulting from transport or handling of the product in a way that does not
comply with our recommendations.
2. Content of package
Water heater
1 tube for condensates (2m)
1 Manual
1 bag with insulation sleeve with 2 seals to be fitted to the
hot water outlet
Coil model only: an other additional insulation sleeve is
provided to be fitted to the recirculation fitting.
1 metal strap and screw to fix the device on the ground
1 safety valve to be installed on cold water pipe
(not to be used in France)
1 connection for evacuation of the condensates
4
