8
Remove the sleeve and separate the
upper and lower halves of the stylus
clip.
9b
With the S-Pen clicked open, place
it into the cavity of the bottom clam
shell piece. The button on the S-Pen
should face upwards.
10
Place the top half of the clam shell
over the S-Pen.
11
Orient the sleeve cover so that the
gap will align with the cable. Slide
the sleeve up the length of the S-Pen
and over the the 2 pieces of the
stylus clip.
12
Insert the retainer into the hole on the
outer sleeve and through the bottom
piece of the clip. It should sit flush
when properly assembled.
13
Insert the S-Pen into the hole in the
top of the recoiler to display.
Gap
Cable
9a
Prepare the stylus for installation
into the clip by making sure that it is
clicked open.
7b
Pivot the fob tool back to remove the
retainer.
