to cont
deteriorates
that matches
and motors. If the
Function Parameters
47
Function
code
Name
Description
Default
value
Modify
to the mapping between
motor power is far from
the power of the motor
the control performance
sharply.
Note:
Resetting the rated
motor power (
) will
initialize
E02.06
Stator resistor
of AM 1
0.001
–65.535Ω
After motor parameter
self-learning is
completed successfully,
in rotary self-learning and
static self-learning 1, the
settings of
can be
updated automatically. In
static self-learning mode
2, the settings of
can be
updated automatically.
These parameters are
the basic parameters for
rol the
motor and have direct
impact on control
performance.
Note:
Exercise caution
before modifying these
parameters.
Depend
on
model
○
E02.07
Rotor resistor
of AM 1
0.001
–65.535Ω
Depend
on
model
○
E02.08
Leakage
inductance of
AM 1
0.1
–6553.5mH
Depend
on
model
○
E02.09
Mutual
inductance of
AM 1
0.1
–6553.5mH
Depend
on
model
○
E02.10
Non-load
current of AM 1
0.1
–6553.5A
Depend
on
model
○
E02.26
Motor 1
overload
protection
0: No protection
1: Common motor (with low speed compensation).
Because the heat-releasing effect of the common
motors will be weakened, the corresponding
electric heat protection will be adjusted properly.
The low speed compensation characteristic
mentioned here means reducing the threshold of
the overload protection of the motor whose
2
◎
