invotel SX8800-4L Скачать руководство пользователя страница 3

iii

Operation in Hold activation:

Start with A1, make or receive a real call, the LED on the SX8800 turns ON solid, then simply press the
button on your telephone, the Music will be heard to the caller and the LED on the SX8800 will start to BLINK 

,

 to

return to the call  just  re-select that line. (Be sure to allow 1 or 2 seconds before putting a call  on HOLD).
The 1

st

 time  your are setting the device If it did not work hang up and try it again 2 or 3 times.

A2

: if  after 2 -3 times it is not working hang up and change the switch to  A2  and try it 2-3 times.

A3

: this setting works better on smaller offices with just a few phones, it is not as powerful as A1 or A2,  if your

phones work fine in A3 just leave it in A3.

Deactivating hold music

 

manually  

If for any reason the hold music is activated inadvertently, it can be deactivated

by pressing the                button

The following are examples of phones that work in B1, B2 or C1,C2  settings: American Venture, ATT 962, ATT 972,
Casio any model , Airway 2 line, Airway 4 line, Panasonic KX-TG 2000B, KX-TG4000B, KXTG2000, KX-TG2720,
KX-TG2730, KX-TG2740, KXTG4000, KX-TGA200, KXTGA400, KX-TGA420, SBC 410,

List of corded phones compatible via Hold Button activation:

Please note: This is just a partial list,  there are other factors relevant to activation via Hold button in these settings-
see-the trouble shooting section or special setting, If your phone is not on this list try it any way or use the B1, B2 or
C1, C2 settings.  B1, B2  works on all phones (flash then Hold).

AT&T:

 21070, 262, 272, 412, 422, 4952, 612, 622, 712, 722, 732, 742, 752, 812, 822, 830, 832, 842, 843, 853,

854, 874, 902, 912,922, 944, 945, 952, 953, 954, 955, 964, 982, 992, SIGNATURE, FT483, 974*, 984*
 

[* only older version prior to 2007 ,newer version works via Flash -Hold]

Brother Quatro

: 412

Bell

:

 

223, 232, 259, 261,

 

268, 367, 470, 52905, Sonecor 412, 412CID, 4900, BE5200, BE5300, Techline 420

GE:

 187, 2-9315-A, 2-9318, 2-9435-A -B -C, 2-9436-A, 2-9438-A,   2-9450-A -B -C -D -E  -F, 2-9439-A to -EGL, 

2-9451A, 2-9481, 2-9487GE2-A, 2-9488, 2-9638-A, 2-9975, 2-9488GE2-A

 

IBM:

 412, 412CID, 4900

        

ITL-4LT

  These phones are the most compatible and are available at http://www.invotel.com

Northern Telecom:

 Unity

Phonemate

: PMG-4600

Panasonic:

 KX-T3110  3120 3122 3135 3145 3155 3160 3165 3170 3175 3280 3980-H 3980-R7 3981, KX-

TC930, KX-TS20, KX-TS21, KX-TS25, KX-TS27, KX-TS208, VA-8400

Radio Shack: 

 206, 208, 209, 210, 212, 411, 412, 612, 43-373D, 43-430, 43-642, ET-180, 43-470, ET-184, ET-

192, ET-193, 43-622, 43-469

 , 1710, 1753

RCA

 25403 RCA, 25413 RCA-2, all other models.

Sony:

  IT-M804

SBC

2105, 4000, 225, 420

Southwestern Bell:

 FT325, FT360, FT365BL FT383, FT412, FT483, FT484

Sprint/Radio Shack

:

 SP-702 / 43-5702, SP-705

TT Systems:

 4012, 412, 412CID, 4900, 4300, 5100, 5200, 5300, 7993

Vtech:

 4121

A B C   1  2  3

Hang up and set  switches in front to A position
and switches in the back to 1 position

FLASH

HOLD

P3

Содержание SX8800-4L









Отзывы: