All-In-One Professional Music-On-Hold
Controller /Adapter
Models: SX8800-4L, SX8800-2L
Rev 29
•
Plug the included AC adapter. (110/240 V AC to 12V DC)
•
Confirm that all Red LED lights in front of this unit are double blinking
•
Use one of your telephones and unplug the cord for L1/L2 from it and connect it to L1/L2 IN jack on
SX8800, now connect L1/L2 OUT jack to your telephone using the provided phone cord, make sure
you have dial tone on your lines 1 and 2
•
If you have the SX8800-4L model unplug the cord for L3/L4 from your phone and connect it to L3/L4
IN jack on SX8800
(the rightmost jack)
and connect L3/L4 OUT jack on SX8800
(2
nd
jack from right)
to your
telephone using the provided phone cord, make sure you have dial tone on your lines 3 and 4
•
Observe that as you connect the lines the blinking lights turn OFF.
(on non existing lines the lights keep
blinking and that is OK)
•
•
•
•
Alternatively you may use a splitter (T adapter) at the Wall jack to connect both this device and a
telephone
(in that case the L1/L2 OUT jack and L3/L4 OUT in SX8800-4L are not connected)
L1/L2
IN
L3/L4
IN
L3/L4
OUT
110/240 V
L1 L2
Please note: just one telephone
may be connected to this device,
other telephones remain connected
to their own wall jacks.
L1/L2
OUT
INPUT
Audio
1 2 3
12VDC
1 2 3
3/4
1/2
L3 L4
A B C
A B C
Back of SX8800
Front of SX8800
