iv
Operation in B1, B2 settings:
To activate: press then
To deactivate just re-select that line and press
Voice Deactivation:
if the call has been on Hold at least a few seconds, it can
also be deactivated by just
speaking
over the Audio for example say : “Hi I am
Back” .
If for some reason you are not able to voice -deactivate, try speaking a little
louder and more direct into the microphone, if that does not work hang up and
set the switch to
B2
. Remember you can always use the Flash button to
deactivate the audio as well.
Want to use just one button ?
Press to activate MOH and when
ready to go back to caller just speak over the audio!. Or press Flash again.
Note: this does not hold the line so the other party may still hear you, set the
volume louder to mask it.
In
B1
or
B2
or
C3
settings
the Flash button is used in order to activate the audio
so if you have:
Call waiting , 3 way calling, Centrex Call Transfer
Use
to access an out side line or to answer a call waiting
call etc.
Example 1 ( B1 or B2 settings
)
to take a call waiting call press
Example 2 ( B1, B2 )
to make a 3 way or conference call press
you will get a dial-tone now dial the desired phone number & press
to join the two calls together.
NOTE:
If you have
“Call Waiting”
service, only one call may be placed on
Music-On-Hold, the other call is held in the phone company central office in
silence not in your office.
Automatic Email Recording:
(This feature
is
available on SX8500E only)
SX8500E is the 1
st
device in the world with an exclusive feature:
“It can be
automatically recorded by playing an email”.
The production audio emailed to you
from your dealer contains a “coded noise file” that automatically activates & then
stops the recording process (The RED Status LED light indicates recording is in
progress, the noise codes themselves will not be recorded), all other audio that you
play on your PC will not effect the SX8500E.
Volume setting for Email Auto Load
The recording volume is directly effected by the volume setting on your PC, we
recommend you set the volume to about 75% level. Please note your PC volumes is
adjusted as follows:
Double click on speaker symbol (located on lower right hand side of your screen)
Automatic CD recording (CD Auto Load):
(This feature
is
available on SX8500E only)
SX8500E can automatically be recorded from a PC CD ROM drive or a CD player,
Just insert the CD you received from your dealer into the CD ROM drive of your PC
or insert it into your CD player (volume mid level ), press the play button on the CD
player and walk away. The CD contains a code that starts the recorder in SX8500E
(RED Status LED turns ON) and then stops the recorder, the LED Green Status turns
back ON and play back resumes. The CD player stops on its own.
P9
Hang up and set left switch to middle and right switch to left
Volume control Wave
Volume
75
Not Mute
Windows Media Player
Volume setting
Note on PC audio connection:
You may use male to female extension audio
cords or other methods if you need to extend the length of the connecting cord
(Maximum audio cord length 500 feet)
FLASH
FLASH
FLASH
HOLD
FLASH
FLASH
FLASH
FLASH
FLASH
FLASH
FLASH
FLASH
Tip: If you have audio flicker problem , Reduce the Volume
P4
A B C 1 2 3
