involight LEDPAR SlimPAR1266, Руководство пользователя

Страница: 27 / 47

26
110-119
Green yellow
120-129
Salmon
130-139
Turquoise
140-149
Light Green
150-159
Orange
160-169
Lavender
170-179
Light blue
180-189
Dark blue
190-255
Pink
CH10
0-9 No Function
10-69 Colour fading from slow to fast
70-129 Colour change from slow to fast
130-189 Colour fading in sound mode from slow to fast
190-255 Colour change in the sound mode from slow to fast
3.5 Connections in "DMX" mode:
DMX is the abbreviation for digital multiplex and allows the digital control of several DMX devices via a common
control cable.
Connect the DMX input of the unit to the DMX output of a DMX controller or other DMX device. Connect the output
of the first DMX device to the input of the second and so on to form a series circuit
DMX connectors:
A three-pin XLR socket serves as a DMX output, a three-pin XLR connector serves as a DMX input.
For installations with very long DMX cable paths or high electrical interference, such as in a discotheque, it is
recommended to use a DMX terminator. The DMX terminator is connected in an XLR c
onnector as a 120 Ω
resistor between pins 2 and 3, which is plugged into the last output socket of the DMX line.
3.6 Connections in "Master / Slave" mode:
When you configure a group of devices in the "Master / Slave" mode, the first device controls the others and
allows an automatic or music-controlled and synchronized show. This feature is especially useful for starting a
show without great programming. Connect the DMX output of the master device to the DMX input of the first slave
device. Then, connect the DMX output of the first slave device to the DMX input of the second slave device, and
so on.
"Slave" mode: Can be set via IR remote control