14
1.2 Intended use:
The INVOLIGHT "LIGHTBALL63" is a DMX-512 controllable effect. The INVOLIGHT LED effect can be operated
as a stand-alone device, in master / slave mode, via music control and via DMX-512 protocol. The product has
been developed for professional use in the field of event technology and is not suitable for indoor lighting in house.
This product is approved for AC100-240V, 50/60 Hz AC only and is designed for indoor use only. When choosing
the installation location, make sure that the device is not exposed to excessive heat, moisture and dust. Make sure
that there are no cables around. You endanger your own and the safety of others! The ambient temperature must
be between -5 ° C and + 45 ° C. Keep the device away from direct sunlight and radiators. Do not operate the
device until you have familiarized yourself with its functions. Do not allow the device to be operated by persons
who are unfamiliar with the device. Please note that unauthorized modifications to the device are prohibited for
safety reasons. Using the unit differently than described in this manual may damage the product and void the
warranty. In addition, any other use with hazards, such. As short circuit, fire, electric shock, crashes, etc.
connected
Part 2: Installation:
Unpack the unit and carefully check it for damage before using it. Place the unit in a suitable location or hang it on
a suitable crossmember. The device must be secured with an approved safety cable when the mounting is
suspended. In addition, the mounting bracket must be screwed and tightened with the enclosed screws! Do not
cover the ventilation openings, danger of overheating! The headlight must be mounted at least 50cm away from all
surrounding walls. Then connect the device to the power supply, and if necessary, connect a DMX cable and
connect it to other devices or a DMX controller. More about DMX or Master / Slave operation also under part 3.
During installation, the provisions of BGV C1 (formerly VBG 70) and DIN 15560 have to be observed! The
installation may only be carried out by authorized specialists!
IMPORTANT!
Overhead mounting requires a high degree of experience. This includes knowledge of the load-
bearing capacity, the installation material used and the safety inspections of the material and the projector used,
but the required experience is not limited to this alone. Under no circumstances should you attempt to perform the
installation yourself if you do not have the appropriate qualification. Instead, commission a professional installer.
Incorrect installation may result in personal injury and / or damage to property.
NOTE!
Use of tripods.
When the unit is mounted on a tripod, be sure that the weight of the unit does not exceed the permissible load
of the tripod
Delivery includes:
1x „LIGHTBALL63“, 1x user manual
