involight 4052809267395, Руководство пользователя

Страница: 21 / 43

20
RUN SELECTION MODE
DMX Operation in DMX mode.
SLAV Operation in slave mode.
DMX
DMX START ADDRESS
D.001 - D.512 Set DMX start address.
PERS
SELECTION OF DMX
MODE
STRG 13-channel operation (TAB.6)
ARC.1 3-channel operation (TAB.1)
AR1.D 4-channel operation ( TAB.2)
ARC.2 6-channel operation (TAB.3)
AR2.D 7-channel operation (TAB.4)
AR2.5 8-channel operation (TAB.5)
HSV 3-channel operation (TAB.8)
ID ID ADDRESSING ID01 - ID66
Selection of the ID address. The ID is used
to operate up to 66 devices on a single DMX
address. The ID is selected directly on the
device in the settings. The device with the
set ID is then controlled at the control panel
via the value of channel 13.
TEMP
TEMPERATURE
DISPLAY
CURR The inside temperature is displayed in ° C.
EDIT
CHANGE
PROGRAMS
PR.01 - PR.10
In this menu you can change the programs
[PR.01] to [PR.10].
SC.01 - SC.30
Each program has 30 steps, which can be
changed. Each of these steps enables the
creation of a scene with the following
parameters: red, green, blue, amber, white,
UV, strobe, time, fade. Hold down the
ENTER key for approx. 5 seconds to save
the data.
R (000-255) RED, Intensity R000
– R255
G (000-255) GREEN, Intensity G000
– G255
B (000-255) BLUE, Intensity B000
– B255
Y (000-255)
AMBER, Intensity A000
– A255
W (000-255) WHITE, Intensity W000
– W255
U (000-255)
UV- / BLACK LIGHT,
Intensity UV000
– UV255
ST. (00-20) Flash frequency of the stroboscope
T . (000-255 Scene duration (time) in seconds
F. (000-255)
Fade time
SET
SETTING
UPLD
With this function you can transfer all
programs from the MASTER device to the
SLAVE devices.
Password: [UP] + [DOWN] + [UP] + [DOWN]
and confirm with ENTER.
REST Reset the program.
ID (OFF/ON)
You can activate or deactivate the second
addressing (ID) in the [ID] menu.
RGBW (OFF/ON)
Enable or disable internal white balance.