Introduction
Overview
Introduction
The PowerEase
®
500 Power Supply is a microprocessor-controlled power supply
for electrophoresis of pre-cast and hand-poured mini-gels. The power supply is
designed to simplify electrophoresis by combining high performance and
programming flexibility with ease of use when running mini-gel and blotting
applications.
The PowerEase
®
500 Power Supply is designed around the single gel concept:
you need to think only about the electrical parameters and limits for a single gel.
This manual describes the setup and operation of PowerEase
®
500 Power Supply
including important information on safety and maintaining the unit.
Features of
PowerEase
®
500
The important features of PowerEase
®
500 Power Supply are listed below:
•
Large LCD display allows electrical parameters to be displayed in either
graphical or numerical formats
•
Eight pre-programmed methods for running and blotting Novex
®
pre-cast
mini-gels
•
Four custom methods for running your custom applications
•
Simple three step operating procedure to start running or blotting Novex
®
pre-cast gels
•
Microprocessor control provides highly accurate electrical outputs resulting
in exceptional blotting capability
•
Parallel port for printing experimental results to most printers
•
Optional Temperature Probe to continuously monitor the buffer temperature
and shut the unit down in the event of overheating
•
Two sets of output jacks allows electrophoresis of multiple mini-cell units in
constant voltage, current, or watts
Continued on next page
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
