manualshive.com logo in svg

Invitrogen PowerEase 500, Инструкция по эксплуатации

Поделиться
Скачать
Invitrogen PowerEase 500 Скачать руководство пользователя страница 12

Safety Information 

 

Avoiding 
Electrical Shock 

The PowerEase

®

 500 Power Supply produces high voltage outputs which are 

electrically isolated from earth ground to reduce the risk of electrical shock to 
the user. Observe the following guidelines to ensure safe operation of the unit. 
The PowerEase

®

 500 Power Supply has been designed for use with 

electrophoresis cells with shielded banana plugs thus minimizing potential 
shock hazard to the user. Invitrogen does not recommend use of other 
unshielded banana plugs. 
To avoid electrical shock: 

1.  NEVER connect or disconnect wire leads from the power jacks when the 

amber high voltage indicator light is on. 

2.  WAIT at least 5 seconds after stopping a run before handling output leads 

or connected apparatus. 

3.  ALWAYS make sure hands and work area is clean and dry before making 

any connections or operating the power supply. 

4.  ONLY connect the power supply to a properly grounded AC outlet. 

 

Avoiding Damage 
to the Instrument 

1.  For proper ventilation, leave at least 10 cm of space behind the instrument, 

and at least 5 cm of space on each side. 

2.  Do not operate the power supply in high humidity environments (> 95%), or 

where condensation can occur. 

3.  To avoid condensation after operating the power supply in a cold room, wrap 

the unit in a plastic bag and allow at least 2 hours for the unit to equilibrate to 
room temperature before removing the bag and operating the unit. 

 

Symbols 

The symbols used on the PowerEase

®

 500 Power Supply are explained below. 

 

Used on the PowerEase

®

 500 Power Supply to indicate an area where a 

potential shock hazard may exist. 

 

Used on the PowerEase

®

 500 Power Supply to indicate a warning. Consult the 

manual to avoid possible personal injury or instrument damage. 

 

 
Used on the PowerEase

®

 500 keypad to indicate the secondary 

Power

 button. 

 

 
Used on the PowerEase

®

 500 keypad to indicate the 

Start

 method button. 

 

 
Used on the PowerEase

®

 500 keypad to indicate the 

Stop

 method button. 

  

 

  

xi 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание PowerEase 500






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды