www.invisiblefence.com
7
Model: Boundary Plus
®
(RIG00-11338)
FCC ID: KE3-3001186
IC: 2721A-3001186
This device complies with Industry Canada licence-exempt RSS standard(s). This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. Cet
appareil est conforme à la partie 15 des régles FCC. L’exploitation est autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Modification or changes to this equipment not expressly approved by Radio Systems
®
Corporation may void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the Computer Collar
®
Unit.
• Connect the equipment to an outlet on a circuit different from that to which the Computer Collar
®
Unit is connected.
• Consult the dealer, or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Australia
This device complies with the applicable EMC requirements specified by the ACMA (Australian Communications and
Media Authority).
European Union
This equipment has been tested and found to comply with relevant EU Electromagnetic Compatibility, Low Voltage and
R&TTE Directives. Before using this equipment outside the EU countries, check with the relevant local R&TTE authority.
Unauthorized changes or modifications to the equipment that are not approved by Radio Systems Corporation are in
violation of EU R&TTE regulations, could void the user’s authority to operate the equipment, and void the warranty.
This product is in full compliance with the provisions of the R&TTE - Directive 1999/05/EEC. The Declaration of
Conformity can be found at: http://www.invisiblefence.com/international/declarations-of-conformity.asp.
Dealer Name: _____________________________