3
shall be terminated with a 75ohm terminating resistor. It is also recommended to terminate
unused STB output ports with 75ohm terminating resistors.
Satellite input ports from 1x Quattro
LNB or 2x Wideband LNBs
Terrestrial input port
Terrestrial loop-through output port
Satellite loop-through output ports
Trunk power LED
STB ports
DC In port
SW1 manual switch -
Quattro / Wideband LNB type
DC In LED
Ports status LEDs
Product configuration
Each of the four STB output ports is compatible with either Sky Q, Sky+ HD or Sky + STB
models and can detect automatically what type of STB is connected to each port. Each port
supports 16 User Bands. The list of the User Bands’ parameters appears on the next page.
The Multiswitch unit has a Port Status LED next to each of the four STB ports.
The status LED identifies the mode of the port:
- solid green = Legacy mode (e.g. Sky+ STB).
- blinking green = dSCR or SatCR mode (e.g. Sky Q or Sky+ HD STBs).
- off = no voltage detected on the port (only terrestrial signal available on the port)
All the four STB output ports combine the Terrestrial input signal.
