Inverto Onebox Essential 3650s, Руководство пользователя

Страница: 15 / 66

En
11
3. Press the OK button to view the satellite list and then select the satellite you want to add.
4. Press the OK button to confirm your selection.
5. You should not need to set any of the following items in the Dish Settings menu as they should all be pre-
fixed to the default values (highlighted below).
The settings will only need to be changed if a motorized system is used or a DiSEqC switch is used to
select one from multiple LNB feeds.
LNB Power: • [13V/18V] Set LNB power 13V/18V with the ◄►buttons.
• LNB Type: [9750/10600] Set LNB type with the OK button. Select User Single or User Dual to
input LO frequency values manually.
Low Band: [9750] Can be input with the remote control numeric keys.
High Band: [10600] Can be input with the remote control numeric keys.
• 22 kHz: [Auto] Set the path of 0/22kHz band switching control signal to On, Off or Auto mode.
• DiSEqC1.0/1.1: [LNB1] Set the assigned port on the DiSEqC switch or monoblock LNB.
6. Press the Green button and enter text characters if you wish to change a satellite name. Press the EXIT
button to leave this menu.
3. InSTaLLaTIon - moToRIzeD DISH SeTTIng
You need to position your antenna correctly for receiving the best signal quality. Consider also consulting the user
manual supplied with your DiSEqC/USALS motor.
1. Select Motorized Dish using the ▲▼ buttons and press the OK button.
2. Select the satellite using the ◄► buttons or press OK to select a satellite from the satellite list by using the
▲▼ buttons. The Motorized Dish Setting menu indicates the selected satellites.