Inverto IDLV-3440DM, Руководство пользователя

Страница: 31 / 36

En
27
Technical Specifications
DVB-S/S2 Tuner Input (ISI Factory Optional)
Connector Type
Input Frequency Range
Input Level
Symbol Rate
Roll Off Factor
FEC Code Rate
LNB Polarity Selection Voltage
LNB Band Selection Tone
Satellite Selection Command
ISI ID
DVB-C Tuner Input
Connector Type
Standard
Input Frequency
Input Level
Symbol Rate
Constellation
Bandwidth
Input Return Loss
DVB-T/T2 Tuner Input
Connector Type
Standard
Input Frequency
Input Level
Constellation
Bandwidth
FFT Mode
Guarding Interval
FEC Code Rate
Input Return Loss
ASI Input
Connector Type
Standard
Input Bit Rate
Built-in Remux
Number of Input
Number of Output
TS Input Management
TS Output Management
Service and PID Management
PSI/SI
4×F type female 75Ω for Input
950 ~ 2150MHz
-25 ~ -65dBm
2 -45MBaud’s
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
0, 13V, 18V selectable
0/22KHz selectable
DiSEqC 1.0
1 ~ 255 user configurable
4×F type female 75Ω for Input
EN 300 429, ITU J.83 Annex A, B, C
51~862MHz
45 ~ 95dBμV
16QAM, SR=6.875Msps
256QAM, SR=6.875Msps
1 ~ 7MBaud (ITU J.83 Annex A)
16QAM, 32QAM, 64QAM, 128QAM, 256QAM
6MHz, 7MHz, 8MHz
8dB (typ.)
4×F type female 75Ω for Input
EN 300 744(DVB-T), EN 302 755 (DVB-T2)
104 ~ 862MHz (VHF/UHF)
-20 ~ -70dBm
DVB-T: QPSK, 16QAM, 64QAM
DVB-T2: QPSK, 16QAM, 64QAM, 256QAM
6MHz, 7MHz, 8MHz
DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB (typ.)
1×BNC female, 75Ω
DVB-ASI, EN50083-9
≤216Mb/s
9xMPTS/SPTS
5xMPTS/SPTS
Demux and Remux among ASI, TS/IP and CI Inputs
Remux for ASI output, TS/IP output and modulator
Service and PID level for Remux, filtering and remapping
PSI/SI table regeneration, NIT and SDT edition,
LCN Edition and Re-generation
Descrambling
Descrambler
Common Interface
BISS Mode
QAM Modulation
Standard of System
Symbol Rate
Constellation
I/Q Amplitude Error
I/Q Phase Error
Phase Jitter
MER
COFDM Modulation
Standard of System
Constellation
Bandwidth
FTT carrier number
Guard Interval
FEC rate
MER
RF Output
Interface
Carrier Central Frequency
Output Level
Spurious
Return Loss
ASI Output
Connector Type
Standard
Output Bit Rate
Data Mode
Package Length
Signal Level
ASI Output Source
TS/IP Gigabit Ethernet (Duplex mode)
Interface
Physical Layer Standard
Operation Mode
Maximum Effective Bit Rate
DVB Common Scrambling Algorithm (CSA)
4 x PCMCIA slots, compatible with major CA CAMs in the
market
BISS-1, BISS-Ez
ETSI EN300 492, ITU J.83, Annex A/C: 16/32/64/128/256QAM
2.5~6.99 Bauds
16QAM, 32QAM, 64QAM, 128QAM, 256QAM
≤ 0.1%
≤ 0.1%
< 0.5°RMS
36dB min., 42dB typ. (with tester equalizer “off ” )
ETSI EN 300 744
QPSK/16QAM/64QAM
5/6/7/8MHz
2K, 8K
1/4, 1/8, 1/16, 1/3216/32/64/128/256QAM
1/2, 2/3, 3/4, 5/6, 7/8
36dB min., 40dB typ.
1x F-type Female, 1x F-type Female(-20dB), 75Ωtype
female 75Ω for loop through output
48~996MHz adjustable, step by 1 KHz
92-109dBμV@1 RF output enabled, 88-105dBμV@ 2 RF
output enabled
85-102dBμV@3 RF output enabled, 83-100dBμV@ 4RF
output enabled
step by 1dBDVB-T: 2K/8K
≥50dBc typ.
≥12dB typ.
6x BNC female, 75Ω,
DVB-ASI, EN50083-9
≤ 200Mb/s
Byte
188/204 Bytes
800±80mV
ASI out 1-4: TS from Tuner 1 to 4 pass through (Descrambled)
ASI 5-6: TS from Remux (mirrored)
1x RJ-45
IEEE 802.3, 10/100/1000 Base-T
1. Full-duplex: 1x multicast/unicast input and output;
2. Multi-channel Output: 5x multicast/unicast MPTS/SPTS
output;
3. IPTV Output: 128x multicast/unicast output, unstuffed
stream with video/audio only
1. Full-duplex: Input: 80Mbps, Output: 80Mbps
2. Multi-channel Output: 700Mbps
3. IPTV Output: 430Mbps