When the inverter is out of the factory, the installation location of Wifi
plug is sealed by a sealed plate as shown in Figure 5.13.When installing the Wifi
Plug, remove the sealing plate, replace it with the sealing plate with square hole in
the accessories, and tighten the screws. Insert the Wifi Plug into the interface and
fix it with a screw. The configuration of the WiFi Plug needs to be performed after
various electrical connections have been completed and the inverter DC power on.
When the inverter is on the DC power, it is determined whether the WiFi Plug is
normally electrified (The LED light shines out of the shell).
For the configuration of Wi-Fi Plug,please refer to illustrations of the Wi-Fi Plug.
5.4.1 Installation of Wi-Fi Plug
5.4.2 Configuration of Wi-Fi Plug
Pic 5.12 Internet monitoring solution
Pic 5.13 Wifi Plug installation diagram
PC
Router
WIFI
GPRS
Web Server
Phone
- 19 -
- 20 -
