inveo NANO TEMP, Руководство пользователя

Страница: 20 / 22

9 Firmware update
The module has the ability to update the firmware. The firmware is supplied as a file with .hex
extension.
Note! Improper use of the update feature may damage the module. Make sure that
undisturbed power is connected to the module for duration of programming.
To perform the programming operation, go to the Windows command line (Start-> Run-
> type 'cmd' and confirm with Enter).
Then navigate to the directory where the file resides and enter the command
tftp <module _ip_adress > PUT filename .hex
where: < module _ip_adress > is the IP address of the module
filename.hex – is the firmware supplied by Inveo s.c.
The programming takes about 1 minute and it’s confirmed by “File Transferred” message.