inventum VVW7040BS Series, Руководство пользователя

Страница: 48 / 112

SETTING THE LEVEL OF RINSE AID CONSUMPTION
When water stains form on your dishes after a wash cycle, you have to increase the level of rinse aid consumption.
When blue stains form on your dishes after a wash cycle, you have to decrease the level of rinse aid consumption.
Set the level of rinse aid consumption according to the information in section 'Rinse aid consumption settings' .
Note:
As a default, the level of rinse aid consumption of the appliance is set to level 4.
1. Make sure that the appliance is off.
2. Push and hold the program selector button and push the on/off button.
3. Hold the program selector button until the display briefly shows rA. After that the display shows the latest set level
of rinse aid consumption.
4. Push the program selector button to change the level of rinse aid consumption.
5. Push the on/off button to confirm the setting.
LOADING THE APPLIANCE
Correctly placing dishes into the appliance has a positive effect on the energy consumption and the washing and
drying performance of your appliance.
You can place dishes in the cutlery drawer or basket, the upper basket and the lower basket.
Caution:
Make sure that you load the appliance in such a way that the dishes do not block the upper and lower
spray arm. If the spray arms are blocked they cannot spin during washing.
Caution:
Make sure that you load the appliance in such a way that the dishes do not block the latch of the
detergent reservoir. If the detergent reservoir is blocked, it cannot open during washing.
Note:
Make sure that you rinse the dishes before loading the appliance.
Note:
Do not overload the baskets or load dishes in the wrong basket.
Loading the cutlery drawer
The cutlery drawer is designed for loading cutlery. You can remove the cutlery drawer for easy loading.
1. If necessary, remove the cutlery drawer from the appliance. Refer to section
'Removing the cutlery drawer'
.
2. Place the cutlery items in the drawer.
Loading the cutlery basket
The cutlery basket is designed for loading cutlery.
Warning:
Place sharp items of cutlery, such as knives and forks, face down in the cutlery basket to prevent injury.
Caution:
Make sure that there are no items of cutlery sticking out of the bottom of the basket.
1. Place the cutlery piece by piece in a compartment of the cutlery basket to make sure that the
spray arms can reach all items.
(Figure 15)
(Figure 16)
48 • English