inventum VVW6035AW, Руководство пользователя

Страница: 50 / 112

1. Open the latch (A) on both guiding rails.
2. Remove the cutlery drawer from the guiding rails.
STARTING THE APPLIANCE
1. Push the on/off button to start the appliance. The indicator on the on/off button goes on.
CHOOSING A PROGRAM
Note:
For an overview of the programs, refer to section
'Programs'
.
1. Use the program selector button to choose a program. The display shows the selected program and the duration.
2. Use the timer button to delay the start time of the program. Refer to section 'Delaying the program' .
3. Use the half-load button to add the half-load option to the selected program.
Note:
If the half-load option is not compatible with the selected program, a buzzer sounds.
4. If necessary, cancel the half-load option by pushing the half-load button again until the corresponding indicator
goes off.
5. Push the start/pause button to start the program.
CHANGING THE PROGRAM
You can change the program while the appliance is running.
1. Push the start/pause button.
2. Wait until the program stops.
3. Use the program selector button to choose another program.
4. Push the start/pause button.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for a maximum of 24 hours.
1. Push the timer button to delay the start time of a program.
2. Push the start/pause button.
3. Push the timer button to increase the time by 1 hour.
4. Push the start/pause button to activate the timer.
Note:
Set the time to 0 to cancel the timer.
The program will start when the timer has finished.
RESETTING THE PROGRAM
You can reset the program while the appliance is running.
(Figure 24)
50 • English