English
•
19
RESIDUAL HEAT DISPLAY
The residual heat display shows the glass is still too hot to touch around the cooking zone.
After switching off the cooking zone, the corresponding display shows [
H
]. As soon as the temperature has decreased
enough the [
H
] indication will disappear.
KEY LOCK
The key lock function is for blocking and setting the hob in a save mode during use. Setting a higher heat setting or other
alterations are not possible. It is only possible to switch the appliance off.
The key lock is activated when the key lock key is pressed. This activation is confirmed by a sound signal. The display
shows
[Lo]
and the controls are blocked.
TIMER FUNCTION
The timer function can be used in two ways: minute minder timer and cooking zone timer.
Minute minder timer
The minute minder timer is not connected to a cooking zone and can be operated as long as the hob is actively in use.
Press the TIMER key when the hob is active. The display shows . Set the desired time with the + and - keys. The range of
the minute minder timer is between 0 to 99 minutes. If there are no controls touched in 10 seconds, the minute minder time
will be set. The time runs down according to the setting.
When the time is over, a signal sounds and the timer display blinks. The sound signal will stop automatically after 30 seconds
or by operating any key.
To change the timer, press the TIMER key again and change the time with the + and - key.
Cooking zone timer
The cooking zone timer is connected to a cooking zone and can be set separately for each cooking zone. In contrast to the
minute minder timer the cooking zone timer switches off the cooking zone when the set time runs out.
• Switch on the hob and activate a cooking zone.
• Set the heat setting with the + and - key.
• Press on the TIMER key . The display shows . The timer will now function as a minute minder timer.
• Press the TIMER key again until the corresponding LED blinks to activate the cooking zone timer. The blinking LED
indicates for which cooking zone, the cooking zone timer is set.
• Set the desired time with the + and - key.
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
To set an extra cooking zone timer, do as follows:
• Activate another cooking zone.
• Set the heat setting with the + and - key.
• Press on the TIMER key . The timer will now function as a minute minder timer.
• Press the TIMER key again until the corresponding LED blinks to activate the cooking zone timer.
• Set the desired time with the + and - key.
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
When the selected time has runs down, a signal sounds and the timer display shows “
_ _
”. The programmed cooking zone
will be switched off and [
H
] appears in the display if the cooking zone is hot.
SOUND SIGNAL
When the hob is in operation, the following activities will be signalled by means of a sound signal:
• normal key activation with a short sound signal
• continuous operation of keys over a longer period of time (10 seconds) with a longer, intermittend sound signal.
DISPLAY INDICATION
Indication on the display
Description
/
An error has occured. Check the notification according to the table in chapter 8.
Residual heat indication: the cooking zone is still hot.
Place a pan on the active cooking zone or switch it off.
