inventum IOV6032DRVS, Инструкция по эксплуатации

Страница: 25 / 30

problems & solutions
12
Problem Solution
The touch keys don’t respond. Unplug the appliance or remove the fuse in the fusebox. Wait a
few minutes before plugging the appliance back in.
The oven lamp is not lit. Replace the oven lamp according to the instructions.
The oven is not heating up. - Has the correct temperature and oven function been set?
- Is the door of the oven closed properly?
The display of the clock is
flashing.
- There has been a power failure. Reset the clock.
- The oven is switched off because the set cooking time and/
or end of the cooking time has passed. Press the central key
CLOCK to end the function and reset the knobs.
The control light of the oven
function is not lit up.
- Is an oven function selected?
- Is the beginning of the cooking time delayed? The oven will not
start until it reaches the set time.
English •
25
Changing the direction of the door - only possible for model IOV6032DRVS
Decide whether you want the oven door to open to the left or right before positioning the appliance in the kitchen cabinet. Follow the
directions below to alter the opening direction of the door.
• Fully open the door.
• Remove the four fixing screws from the door hinge. Hold the door.
• Remove the four plastic caps from the opposite side.
• Rotate the door 180°.
• Secure the door in its new position using the 4 screws removed previously.
NOTE: Make sure that the oven door is perfectly parallel with the front panel. If it is not, adjust it by means of the screws you
have just inserted.
• Install the oven according to the installation instructions.