inventum AKB6004RVS, Инструкция по эксплуатации

Страница: 25 / 28

English •
25
8 Hang the cooker hood level using the two outer screws. Tighten the screw in or out to level the cooker hood.
Once the cooker hood is level, tighten the middle screw to secure the cooker hood.
9 Fit a flexible exhaust air-pipe onto the cooker hood to the exhaust opening.
Plug in the appliance.
10 When using the starter kit for recirculation the screws for the bracket must be loosened. Hang the recirculation kit on the
loosened screws. Tighten them again.
*
The starter kit for recirculation is not included.
11 Place the chimney on top of the cooker hood. Make sure the inner chimney fits properly in the outer chimney.
12
Slide the inner chimney upwards and fit it to the bracket with two screws. The outer chimney clicks automatically to the cooker
hood through magnets.
Remove all the protective film before using the cooker hood.
ELECTRIC CONNECTION
Make sure the supply voltage ratings correspond with those stated on the rating plate. Plug the appliance in. The cooker hood is
provided with a plug. Make sure the plug remains accessible. Place the socket, if necessary, out of sight behind the exhaust-air pipe.
Attention:
if you want to make a fixed connection, ensure that a multi-pole switch with a distance between contacts of 3 mm is
installed in the supply cable.