INVENTOR V1KI-09, Руководство пользователя

Страница: 20 / 60

16
5.12 Blow Function Setting
BLOW
function: After the unit is turned off, water in evaporator of indoor unit will be
automatically evaporated to avoid mildew.
In cooling and dry mode, press
Function
button till the unit enters
BLOW
function, with
BLOW
blinking, and then press
Enter/cancel
button to turn on this function.
In BLOW mode, press
Function
button till the unit enters
BLOW
function and then press
Enter/cancel
button to cancel this function.
BLOW function setting is shown in Fig.17:
Fig.17 Blow function setting
Note:
1.
After setting BLOW function, turn off the unit by pressing On/Off button on remote controller,
indoor fan will run at low fan speed for 10 min. (BLOW shows).Meanwhile, if BLOW function is
canceled indoor fan will be turned off directly.
2. There is not BLOW function in fan or heating mode.