INVENTOR R2FI-50, Руководство пользователя

Страница: 10 / 116

8
Function Button and Display of Air Conditioner
ON/OFF
●
ON/OFF Button
Press this button to turn on/off the unit.
When turning on/off the unit, the timer
and sleep function which have been set
before will be cleared.
Note: during DRY operation, press
ON/OFF button to turn on the unit directly.
●
Name and Function of Each Button of Air Conditioner
MODE
AUTO COOL
HEAT
DRY
FAN
●
●
●
●
Function Button
FUNCTION
Function Button of Air Conditioner
When the unit operates, it is green;
when the unit is energized but doesn’t
operate, it is red.
Mode Button
Press this button and the mode will
change as follows:
AUTO: in this mode, the operation mode
is automatically determined by controller
based on change of room temperature.
COOL: cooling status is displayed.
DRY: the humidity is decreased but room
temperature doesn’t change.
FAN: in this mode, compressor doesn’t
operate and only indoor fan operates.
HEAT: heating status is displayed.
(Note: there is no HEAT mode for cooling
-only unit).
When the unit is operating, press
function button to set function as per
the sequence of vertical SWING,
horizontal SWING, X-FAN, E-Heater,
TIMER, SLEEP, SET TEMP,
ROOM TEMP. A function which blinks
can be set. Use button “▲”or “▼” for
setting. If there is no change within 5
seconds after setting, the setting will
be confirmed. Or press function button
again to confirm this function.
When the unit is in X-FAN status,
press function button to turn off the
unit directly. If the unit has been turned
off and not in X-Fan status, press
function button to set TIMER ON.
SPEED
SPEED Button
Press this button, fan speed can be
circularly changed as the sequence
of AUTO-LOW-MED-HIGH-AUTO.