Inventor Air Conditioners IKI-09, Руководство пользователя

Страница: 54 / 55

TEST RUNNING
OPERATION INSTRUCTIONS
Check electrical main wire's voltage.
The difference between in-air and out-air temperature should not be less than
Use a thermometer to measure cool air both in and out.
EVALUATION OF THE PERFORMANCE
The unithas Auto-restart funcation, it can remember the running model before power-broken.
Thermometer
Be sure to use the exclusive accessories list above in the installation. or it will lead to water leakage, electric shock, fire, etc.
５０
1. The design of this unit conforms to the requirements of EN14511 standard.
2. The air volume is measured at the relevant standard external static pressure.
3. Cooling (heating) capacity stated above is measured under nominal working conditions corresponding to standard
external static pressure. The parameters are subject to change with the improvement of products, in which case the
values on nameplate shall prevail.
Appendix:
Air conditioner nominal working condition and working range:
Note:
Indoor side Outdoor side
Test condition
DB(
℃
) WB(
℃
) DB(
℃
) WB(
℃
)
Nominal cooling 27 19 35 24
Nominal heating 20
――
7 6
Rated cooling 32 23 43 26
Rated heating 27
――
24 18
Low temp. heating 20
―― －
7
－
8
4. In this table, the outdoor side DB temperature of low temp. cooling include two values, the one in the bracket is the
working condition of the appliance with function of low temp. cooling .
Low temp. cooling 2 1 1 5
１８ （－７） ――