www.inventini.com
7
LIGHTS
CONTROL PANEL
1. The lighting switch is located on the top of the base.
To check the lighting during the day, cover the dusk sensor,
located on the side of the base.
2.
Always remember to turn the product off prior to transportation.
3.
The charging socket is located on the top of the base, next to
lighting switch.
4.
LIGHTING ANG CHARGING
1. The product lighting time is up to 8 hours of continuous operation
depending on the ambient temperature and the degree of charge
2. Products with internal lighting are equipped with accumulators.
Charging takes place using the charger included with the kit.
3. The charging time up to 100% is about 10 hours.
USE AND BATTERY LIFE
1.
Do not exceed the 8 hour usage period without charging the product.
The batteries should be charged even when the product is stored.
2.
UTILIZATION
Electrical / electronic products are not domestic waste!
Dispose of the product after its use in accordance with applicable law.
Remove all inserted batteries / accumulators and dispose of them
correctly, separately from the product.
The consumer is legally obliged (in accordance with the relevant
regulations regarding batteries) to return all used batteries and
accumulators; disposal along with household waste is prohibited.
Batteries and accumulators containing harmful substances
are marked with this symbol. This means that they can not
be disposed of with household waste.
Used batteries / accumulators can be transferred to local waste
disposal sites, producer’s branches or wherever batteries / accumulatprs
are sold.
By following the above recommendations, you meet all relevant legal
requirements and contribute to environmental protection.
Fig. 11
fuse
charging
socket
dawn dusk sensor
main
light
switch
