7
Step 1: Plug the cable into the USB port.
Step 2: Attach the wires with the electrodes, then place the electrodes at the correct location on
the body (below image).
White electrode: Place at “RA”, below the right collarbone.
Green electrode: Place at “RL”.
Red electrode: Place at “LL”.
“RL” and “LL” are below the right and left rib cage respectively. They must align horizontally.
3)
When the above steps are completed, the system will begin recording once an ECG signal is
detected.
4)
Real time display of waveforms is available in the app (below image). The duration of waveform
displayed will depend on each cellphone’s performance. The device will continue to record offline
even if the waveforms are not displayed.
(Viewing available in both landscape and portrait orientations.)
5)
Results are shown for every minute of recording.
(Viewing available in both landscape and portrait orientations.)
6)
When recording is completed, the app will display the results.
(Viewing available in both landscape and portrait orientations.)
Results will show:
