Revision: 0.1
AP-201 Wireless Internet Access Point User’s Manual
Date:02/08/2002
Page
4
of
14
2. Hardware Installation
Place the AP-201
To place the AP-201 on the desktop or setup the metal base on the wall to
hang the Ap-201. Make sure the antennas are in a vertical position (if not,
rotate over 90 degrees).
Connecting the AC Adapter
2
1. To remove the cover on the right side of AP-201.
2. Connect the power cord to an electrical outlet.
3.
Plug the AC adapter power cable into the DC-IN jack on the right side of
AP-201.
4.
When the AC adapter is conncted to AC power, the
POWER
LED will be on.
Connecting the RJ45 Cable
1. Connect RJ45 cable to an wall outlet.
2.
Plug another side into the RJ45 jack on the right side of AP-201
3.
When the RJ45 cable is conncted, the
LINK
LED will be on.
