background image

 

ARM Reference Board 

 Application Note 

Document Number: EB_ARMAT91_XXAXX_B  
Revision: 1.2 
Release Date: 08/11/2010 

 

InvenSense, Inc., 1197 Borregas Ave., Sunnyvale, Ca 94089, USA                 

11

                                          EB_ARMAT91_XXAXX_B 

Tel: +1 (408) 988-7339   Fax: +1 (408) 988-8104 

 

©2010 InvenSense, Inc. All rights reserved. 

Website: http//www.invensense.com 

 

 

 

10.  Programming the ARM AT91 MCU 

The firmware for the InvenSense ARM Board must be factory programmed using the JTAG port JP2 with 
Atmel’s programming tool and software.  The current firmware revision is V1.1.2EVB.  For upgrading boards 
that have an older firmware revision, the ARM MCU may only be programmed by InvenSense or its 
designated representatives. 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

This information furnished by InvenSense is believed to be accurate and reliable. However, no responsibility is assumed by InvenSense for its use, or for any infringements of patents or 
other rights of third parties that may result from its use. Specifications are subject to change without notice. InvenSense reserves the right to make changes to this product, including its 
circuits and software, in order to improve its design and/or performance, without prior notice. InvenSense makes no warranties, neither expressed nor implied, regarding the information 
and specifications contained in this document. InvenSense assumes no responsibility for any claims or damages arising from information contained in this document, or from the use of 
products and services detailed therein. This includes, but is not limited to, claims or damages based on the infringement of patents, copyrights, mask work and/or other intellectual property 
rights.  
 
Certain intellectual property owned by InvenSense and described in this document is patent protected. No license is granted by implication or otherwise under any patent or patent rights of 
InvenSense. This publication supersedes and replaces all information previously supplied. Trademarks that are registered trademarks are the property of their respective companies. 
InvenSense sensors should not be used or sold in the development, storage, production or utilization of any conventional or mass-destructive weapons or any other weapons or life 
threatening applications, as well as in any other life critical applications such as medical equipment, transportation, aerospace and nuclear instruments, undersea equipment, power plant 
equipment, disaster prevention and crime prevention equipment.  

 

©2010 InvenSense, Inc. All rights reserved. 

 
 
 
 
 
 

Содержание ARM Reference Board












Отзывы: