User Manual
XC2907-A Portable Reader
29
1) Configuration: Configure pursuant to the input content.
2) Cancellation: Cancel the EPC filter setting.
3) EPC: Enter the matching data (12 bytes).
4) Matching mask: Enter the matching mask (12 bytes).
8. Precautions
8.1 Description of use of power saving
To enhance the endurance of the whole machine and ensure that the users
can better control the long-term operation of the communication module, the
equipment adopts a flexible power control scheme. Please follow the suggestions
below as per your actual application.
1. Power consumption control:
In this machine, it can set the time to automatically enter the power saving
standby state. Enter the standby mode by setting the automatic sleep time
(provided that there is no operation for a certain period of time, it will
automatically enter the standby mode). The setting method is as follows:
"Settings" "Display" "Sleep." The standby mode can be entered by pressing the
red power button.
2. Module control:
Under the standby mode, the power of all modules will be turned off, and the
system is close to the shutdown state.
Please note that in case that you want to extend the normal operation time of
the device as much as possible. In the event that the conditions permit, it is
recommended that you can charge it at any time when it is idle for a long time.
8.2 Exception declaration
In case that the device suddenly fails to be operated, the 3 status indicators will
display the error status indication. In the event that the device fails to be operated
normally after installing the battery, the device must be restarted. Pressing the
red power key for more than 10s, the system will automatically restart.
8. Precautions
