SECTION 6—FRONT RIGGINGS
Part No 1143195
23
Van Seat
Adjusting the Height of the Center Mount Footrest
WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is
three inches. If the wheelchair is not moving, the front rigging MUST maintain a
minimum of one inch ground clearance - otherwise personal injury and damage may
result.
NOTE:
For
this
procedure,
refer
to
FIGURE 6.8.
1. Remove
the
two
mounting
screws
that
secure
the
footrest
extension
tube
to
the
extension
tube
housing.
2. Adjust
the
footrest
extension
tube
to
the
desired
height
and
align
the
corresponding
holes
to
the
mounting
holes
on
the
extension
tube
housing.
3. Reinstall
the
two
mounting
screws
to
secure
the
footrest
extension
tube
to
the
extension
tube
housing.
Securely
tighten.
4. Repeat
STEPS
1
‐
3
for
the
other
extension
tube.
FIGURE 6.8
Adjusting the Height of the Center Mount Footrest
Seat Frame
Extension
Housing
Extension Tube
Height Adjustment
Holes
Mounting Screws
Extension Tube Mounting Holes
NOTE:
Release
Lever
located
towards
the
front
or
center
of
seat
frame.
