Invacare Top End Crossfire T6 Скачать руководство пользователя страница 6

Страница: 6 / 64

Crossfire

™

Series Wheelchairs

Part No 1134872

SECTION 9—WHEEL LOCKS ............................................................. 57

Replacing/Adjusting the Wheel Locks .................................................................................................57

Replacing the Wheel Lock .................................................................................................................57

Adjusting the Wheel Lock .................................................................................................................57

Changing Wheel Lock Handle Position...............................................................................................58
Converting Wheel Lock From Push-to-Lock to

Pull-to-Lock or Pull-to-Lock to Push-to-Lock..........................................................................................59

Converting From Push-to-Lock to Pull-to-Lock...........................................................................59

Converting From Pull-to-Lock to Push-to-Lock...........................................................................59

SECTION 10—ANTI-TIPPER ............................................................. 60

Adjusting/Replacing Anti-tipper.............................................................................................................60

Adjusting Anti-tipper...........................................................................................................................60

Replacing Anti-tipper...........................................................................................................................61

LIMITED WARRANTY ..................................................................... 63

The benefits of registering:
1. Safeguard your investment.

2. Ensure long term maintenance and servicing of your purchase.

3. Receive updates with product information, maintenance tips, and industry news.

4. Invacare can contact you or your provider, if servicing is needed on your product.

5. It will enable Invacare to improve product designs based on your input and needs.

- or -

Complete and mail the form on the next page

Any registration information you submit will be used by Invacare Corporation only, and

protected as required by applicable laws and regulations.

Содержание Top End Crossfire T6

































































Результаты поиска

Содержание Top End Crossfire T6

Отзывы:

Бренды по названию

Популярные бренды

Invacare Top End Crossfire T6, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Top End Crossfire T6

Отзывы:

Бренды по названию

Популярные бренды