Invacare Top End Crossfire T6 Скачать руководство пользователя страница 13

Страница: 13 / 64

SECTION 1—GENERAL GUIDELINES

Part No 1134872

Crossfire

™

Series Wheelchairs

SECTION 1—GENERAL GUIDELINES

WARNING

SECTION 1 - GENERAL GUIDELINES contains important information for the safe

operation and use of this product.

DO NOT use this product or any available

optional equipment without first completely reading and understanding these

instructions and any additional instructional material such as Owner’s Manuals,

Service Manuals or Instruction Sheets supplied with this product or optional

equipment. If you are unable to understand the Warnings, Cautions or Instructions,

contact a healthcare professional, dealer or technical personnel before attempting

to use this equipment - otherwise, injury or damage may occur.

Stability Warning

The position of the footrest, camber tube, back angle, the tautness of the back upholstery

as well as the user's condition are directly related to the wheelchairs

stability. Any change to one or any combination of the five may cause the wheelchair to

decrease in stability. Use EXTREME caution when using a new seating position. The

addition of anti-tippers may be required.

NOTE: When changes to the left hand column occur, follow across the chart and refer to the

✓

procedure to maintain the proper stability, safety and handling of the racing chair.

EST

OLS

FOOTREST POSITION

●

✓

CAMBER TUBE

●

✓

BACK ANGLE

✓

●

✓

BACK UPHOLSTERY

✓

●

✓

USER CONDITION

✓

●

Содержание Top End Crossfire T6

































































Результаты поиска

Содержание Top End Crossfire T6

Отзывы:

Бренды по названию

Популярные бренды

Invacare Top End Crossfire T6, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Top End Crossfire T6

Отзывы:

Бренды по названию

Популярные бренды