4 Options
4.1 Headrest / Neckrest
WARNING!
Imbalance of the chair
– If the headrest or neckrest is mounted
behind the backrest, it may affect the balance
of the wheelchair. Control the balance of
the wheelchair and if necessary, adjust the
rearwheels backwards to increase the stability.
4.1.1 Height adjustment
B
A
B
A
The height and the removal are operated by the
handwheel. The bar is equipped with an adjustable
stop block.
1.
Loosen the screw in the stop block
B
.
2.
Loosen the handwheel
A
.
3.
Adjust the headrest or neckrest to the desired position.
4.
Re-tighten the handwheel
A
.
5.
Slide the stop block
B
down to the top of the
headrest/neckrest attachment.
6.
Re-tighten the screw.
5 mm Allen key
It is now possible to remove the headrest/neckrest
and reinsert it in the desired position without further
adjustments.
For information about depth and angle adjustment
of the headrest/neckrest and for repositioning of the
headrest/neckrest, see following sections.
4.1.2 Depth / angle adjustment
C
D
C
D
1.
Loosen the handle
D
.
2.
Loosen the screws
C
.
3.
Adjust the depth and angle of the headrest.
4.
Re-tighten the handle and the screws.
4.2 Table tray
WARNING!
Risk of falling / injury
– The table must never be used as a replacement
for the posture belt.
WARNING!
Risk of tipping / injury
– Max load on the table: 8 kg
CAUTION!
Risk of discomfort / minor bruises
– Make sure that the elbows of the user
are placed on the table when pushing the
wheelchair. If the elbows protrudes from the
table while pushing the wheelchair, there is a
risk of discomfort or minor bruises.
The table tray can be adjusted both in depth and width, the
following sections will show the different possibilities.
4.2.1 Mounting the attachment for table tray
1.
A
B
Mount the table attachment
A
with the attachment part
facing outwards. The plain surface
B
of the attachment
should be placed upwards when using the table on the
thin armrests.
2.
A
C
To fit the table attachment
A
to the wide armrest, turn
the attachment around, the patterned surface
C
should
now be facing upwards.
1536533-F
17
