Invacare rea azalea assist, Руководство пользователя

Страница: 22 / 60

Rea® Azalea®
4 Options
4.1 Headrest/Neckrest
4.1.1 Height adjustment
A
B
A
B
The height and the removal are operated by the
handwheel. The bar is equipped with an adjustable
stop block.
1. Loosen the screw in the stop block B .
2. Loosen the handwheel
A
.
3. Adjust the head rest to the desired position.
4. Re-tighten the handwheel
A
.
5. Slide the stop block B down to the top of the headrest
attachment.
6. Re-tighten the screw.
It is now possible to remove the headrest and
reinsert it in the desired position without further
adjustments.
4.1.2 Depth / angle adjustment
C
D
C
D
1. Loosen the handle
D
.
2. Loosen the screws C .
3. Adjust the depth and angle of the headrest.
4. Re-tighten the handle and the screws.
4.2 Hemiplegic armrest
A
B
C
1. Loosen the screw
A
.
2. Remove the original armrest B .
3. Mount the hemiplegic armrest C in the armrest pole.
4. Re-tighten the screw
A
.
A
5. The hemiplegic armrest can be adjusted in angle. The
resistance can be increased/decreased by adjusting the
screw
A .
WARNING!
Risk of damage
Damage on the armrest
– Do not put pressure on the front of the
armrest, as this could cause damage on the
armrest attachment.
4.3 Abduction cushion
A A
1. The height adjustment and removal is operated by the
handwheel
A .
2. The depth is adjusted in a forward or backward position.
Loosen handwheel
A
and turn.
4.4 Trunk support
4.4.1 Trunk support with fixed arm
The trunk supports can be adjusted in height, depth and
sideways.
WARNING!
Risk of trapping
– Be careful not to trap your arm between trunk
support and armrest when changing the angle
of the backrest.
22 1488727-R