Invacare Rea Assist, Руководство пользователя

Страница: 12 / 35

REA® ASSIST 12
3.
2.
1.
1–2.
A
B
A
C
A
D
B
C
1. Angle-adjustable footplates
Adjust the angle and the depth by loosening the
screw (A) at the footplate attachment with a 5
mm Allen key. Adjust the footplate to the correct
position and retighten the screw.
Do not place anything on the footplate when
the screw is loose.
Other pin positions can be used if there is
a risk that the user could injure themselves,
just adjust the footplate to a more suitable
position,
Tools: 5 mm Allen key.
Tools: 5 mm Allen Key
Tools: 5 mm Allen Key
FOOTPLATES/CALF PADS
LEGRESTS/FOOTRESTS
It is important to adjust the legrests, footrests, foot-
plates and calf pads to obtain a good seating posi-
tion.
1. Legrests height adjustment
Adjust the height of the legrests by loosening the
screw (A) one turn with an Allen key. Pull the
legrest until you have obtained the correct height
and the screw is caught by one of the recesses on
the legrest tube. Then retighten screw.
2. Legrests angle adjustment
The angle of the legrest is adjusted using the hand-
wheel (B).
Loosen the handwheel approx. one turn. The angle
can be set in intervals from 80° to 0°. Retighten the
handwheel when the correct angle is obtained.
The distance between the lowest part of the foot-
rest and the ground must be at least 40 mm.
3. Footrests height adjustment
Adjust the height in the same way as the legrests
above.
NOTE! Don't touch the upper screw (C).
The distance between the lowest part of the
footrest and the ground must be at least
40 mm.
2. Calf pads
The calf pads can be fi tted in four different depth
positions. Swing the pad forwards. Unscrew screw
(B) using an 5 mm Allen key. Remove the large nut
(C) on the reverse side and place it in the other
attachment hole. Move the calf pad to the new
position and secure it into place with the screw.
The height of the calf pads can easily be adjusted
using the handwheel (D).
Tools: 5 mm Allen Key