SECTION 1—GENERAL GUIDELINES
Part No. 1122145
13
Pronto
®
M94
™
SECTION 1—GENERAL GUIDELINES
WARNING
SECTION 1 - GENERAL GUIDELINES contains important information for the safe
operation and use of this product.
DO NOT use this product or any available
optional equipment without first completely reading and understanding these
instructions and any additional instructional material such as Owner’s Manuals,
Service Manuals or Instruction Sheets supplied with this product or optional
equipment. If you are unable to understand the Warnings, Cautions or Instructions,
contact a healthcare professional, dealer or technical personnel before attempting
to use this equipment - otherwise, injury or damage may occur.
CONTROLLER SETTINGS/REPAIR OR SERVICE
Set-up of the Electronic Control Unit is to be performed ONLY by a qualified technician.
The final tuning adjustments of the controller may affect other activities of the wheelchair.
Reprogramming the controller reduces the stability/control of the wheelchair. Other
program settings could cause the wheelchair to tip over resulting in serious injury to the
user and/or damage to the surrounding property. If any individual other than a qualified
technician performs any work on these units, the warranty is void.
OPERATION INFORMATION
Ensure that driving surfaces, ramps, lifts, elevators, etc. are capable of supporting
combined weight of user and wheelchair (for a 500 lbs user, the combined weight could
be up to 800 lbs).
Performance adjustments should only be made by professionals of the healthcare field or
persons fully conversant with this process and the driver's capabilities. Incorrect settings
could cause injury to the driver, bystanders, damage to the chair and to surrounding
property.
After the wheelchair has been set-up, check to make sure that the wheelchair performs to
the specifications entered during the set-up procedure. If the wheelchair does NOT
perform to specifications, turn the wheelchair OFF immediately and reenter set-up
specifications. Repeat this procedure until the wheelchair performs to specifications.
ALWAYS shift your weight in the direction you are turning. DO NOT shift your weight in
the opposite direction of the turn. Shifting your weight in the opposite direction of the
turn may cause the inside drive wheel to lose traction and the wheelchair to tip over.
The arms on the M94 wheelchair are designed as armrests ONLY. The arms are not
designed to support the full weight of the wheelchair user.
DO NOT shift your weight or sitting position toward the direction you are reaching as the
wheelchair may tip over.
DO NOT store items under seat - interference with seat latch may result.
