Invacare Pronto Air Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 64

background image

Invacare® Pronto® Air Personal Transporter with MyBody Seating

CAUTION!
Damage to mobility device and accident hazard

It is possible that collisions can occur between mobility
device components due to various combinations of
adjustment options and their individual settings

–

The mobility device is fitted with an individual,

multiply adjustable seating system including adjustable
legrests, armrests, a headrest or other options. These
adjustment options are described in the following
chapters. They are used to adapt the seat to the
physical requirements and the condition of the user.
When adapting the seating system and the seat
functions to the user, ensure that no mobility device
components collide.

Electrical adjustment options

–

Please refer to the user manual for your remote for

more information on operating electrical adjustment
options.

6.2

Adjustment possibility for remote

The following information is valid for all seating systems.

CAUTION!
Risk of the remote being pushed backwards
during an accidental collision with an obstacle,
such as a doorframe or table, and the joystick
being jammed against the armpad if the position
of the remote is adjusted and all screws are not
completely tightened

This will cause the mobility device to drive forward
uncontrollably and potentially injure the mobility device
user and any person standing in the way.

–

When adjusting the position of the remote, always

make sure to tighten all screws securely.

–

If this should accidentally happen, immediately switch

the mobility device electronics OFF at the remote.

6.2.1

Installing the Joystick

24

1580058-B

«
...
22
23
24
25
26
...
»

Содержание Pronto Air

































































Отзывы:

Нет отзывов

Похожие инструкции для Pronto Air

Бренд: Defiant Страницы: 88

Бренд: Qlink Страницы: 37

Бренд: UFREE SCOOTER Страницы: 11

Бренд: TilGreen Страницы: 22

Бренд: Schildkröt Страницы: 35

Бренд: Stars n Stripes Страницы: 38

Бренд: Streamline Seats Страницы: 2

Бренд: Streamline Seats Страницы: 2

Бренд: Quadro Страницы: 104

Бренд: Baja motorsports Страницы: 43

Бренд: Easylife Страницы: 43

Бренд: Olsson and Brothers Страницы: 68

Бренд: Razor Страницы: 12

Бренд: NEO Страницы: 25

Бренд: RATTAN Страницы: 19

Бренд: Razor Страницы: 3

Бренд: Ugo Страницы: 14

TURBO 6000watt Lithium scooter

Бренд: Blaze Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды