Invacare MK6i Series Скачать руководство пользователя страница 23

Страница: 23 / 134

Invacare® MK6i™ Electronics

4.21

M99 Memory Seating Module

•

Provides memory seating feature

•

Used with the M610i

4.22

4 Push Button Switch Attendant Module

•

Provides 4-Switch, 8 Switch, and 12 Switch Attendant Control
Connections.

•

4 push button switch used with M6100i

4.23

8 Way Rocker Switch Attendant Module

•

8-way rocker switch used with the M610i

4.24

IR/Mouse Module

•

The IR/MOUSE module enables the user to use the driver
control to wirelessly operate infrared (IR) ready devices
including televisions, radios, DVD players, Cable boxes, etc.
as well as Radio Frequency (RF) wireless control of mouse

movement and mouse clicks on a Personal Computer (PC).

•

This is available on any expandable system.

4.25

Mouse Only Module

•

The RF Mouse Only Module allows the driver control to
wirelessly control mouse movement and mouse clicks on
a personal computer.

1141471-L-00

Содержание MK6i Series







































































































































Результаты поиска

Содержание MK6i Series

Отзывы:

Invacare MK6i Series, Справочник по полевым условиям эксплуатации, Страница: 23 / 134

Результаты поиска

Содержание MK6i Series

Отзывы: