Invacare LiNX REM110, Руководство пользователя, Страница: 24 / 41

23 60126083-B
Refer to the charger user manual, the power
wheelchair base user manual and instructions supplied
with the batteries for more information about charging
the batteries.
1. Plug the battery charger into the remote charger socket
A .
If the remote is powered up, the battery gauge indicates the
system is connected to the charger by cycling between a left-to-
right chase sequence and then displaying the approximate
battery charge state at the end of the chase sequence.
Battery
charge
state 1
Red LED
on.
Battery
charge
state 2
Red and
one
amber
LED on.
Battery
charge
state 3
Red and
two
amber
LEDs on.
Battery
charge
state 4
Red,
amber
and one
green LED
on.
Fully
charged
Green,
green,
amber,
amber
and red
LEDs on.
The LiNX system does not have to powered up when charging
the batteries; however, if it is not powered up, the battery
gauge does not indicate the charging state. For more
information about the charging state, refer to the charger user
manual or the power wheelchair base user manual.
While charging, the wheelchair is in drive inhibit mode. The
drive inhibit mode ensures the wheelchair does not drive when
connected to the charger. For more information about drive
inhibit mode, refer to
8.3 Drive Inhibit Indication, page 28 .
NEW Batteries Only—The wheelchair power must be
on during charging to ensure accurate battery charge
levels display on the remote. New batteries must be
fully charged. The battery synchronization procedure
MUST be performed within 24 hours of powering on
the wheelchair. The battery synchronization procedure
can be found in the LiNX service manual and must be
performed by a provider or qualified technician.
6.13.1 Battery Alarms
High-Voltage Warning
The batteries are overcharged.
All LEDs are on, and the green LEDs flash.
1. Disconnect the battery charger.
Low-Voltage Warning
The batteries are empty.
Only one red LED is on and flashes.
1. Power down the wheelchair.
2. Charge the batteries immediately.
LiNX® Control System