Part No 1141448
3
InTouch™ Stabilite/Stabilite OM Cushion
Attaching/Removing the Cushion To/From Seating Surface
NOTE:
For
this
procedure,
refer
to
NOTE:
To
remove
the
cushion
from
a
seating
surface,
reverse
the
following
procedures.
NOTE:
The
cushion
attaches
to
the
seating
surface
using
the
hook
and
loop
fasteners
on
the
bottom
of
the
cushion
cover.
The
seating
surface
can
be
seat
upholstery,
drop
base
or
seat
pan.
NOTE:
The
zipper
on
the
cushion
must
always
face
rearward.
WARNING
Make sure the hook and loop fasteners are securely attached to the seating surface and to the
seat BEFORE using. If the cushion is not secured to the seating surface, use caution when trans-
ferring in and out of the wheelchair.
Hook Attachment Strips/No Attachment Strips
1. Remove
double
sided
hook
from
bottom
of
cushion.
2. Align
front
edge
of
cushion
with
front
edge
of
seating
surface.
3. Perform
one
of
the
following:
• Hook
Attachment
Strips
‐
Secure
the
cushion
to
the
seating
surface,
making
sure
that
the
strips
of
loop
on
the
cushion
cover
are
securely
attached
to
the
strips
of
hook
on
the
seating
surface.
• No
Attachment
Strips
‐
Place
the
cushion
on
the
seating
surface.
Loop Attachment Strips
1. Verify
the
double
sided
hook
strips
are
securely
attached
to
the
loop
attachment
strips
on
the
bottom
of
the
cushion.
2. Align
front
edge
of
cushion
with
front
edge
of
seating
surface.
3. Secure
the
cushion
to
the
seating
surface,
making
sure
that
the
double
sided
hook
is
securely
attached
to
the
strips
of
loop
on
the
cushion
cover
and
the
seating
surface.
FIGURE 1
Attaching/Removing the Cushion To/From Seating Surface
Zipper
Loop portion of fastening
strap (attached to cushion)
Double-sided hook
portion of fastening strap
(remove backing if necessary
to attach to seating surface)
Seating surface
The front of the cushion
lines up with front edge
of seating surface
Cushion
