SECTION 6—FRONT RIGGINGS
Part No 1122170
45
Formula™ Powered Seating
Removing/Installing the Center Mount Footrest
NOTE: For this procedure, refer to FIGURE 6.15 on page 46.
Removing
Power Center Mount Footrests
1. Remove the short quick-release pin that secures the center mount rigging to the link
plate (Detail “A”).
2. Remove the rigging pivot pin that secures the center mount rigging to the top of the
support (Detail “B”).
3. Remove the long quick-release pin that secures the center mount rigging to the center
support (Detail “C”).
NOTE: The link drive tube will fall out when the long quick-release pin is removed. Retain for
proper reinstallation.
Manual Center Mount Footrests
1. Remove the rigging pivot pin that secures the footrest to the mounting bracket of the
seat frame.
2. Hold the footrest with one hand and engage the release lever with the other while
simultaneously pulling the center mount footrest out of the mounting bracket of the
seat frame.
Installing
Power Center Mount Footrests
1. Position the link drive tube between the mounting holes of the center support (Detail
“C”).
2. Install the long quick-release pin through the mounting holes of the center support,
the mounting holes of the center mount footrest and the link drive tube (Detail “C”).
3. Install the rigging pivot pin through the upper mounting holes of the support bracket
and the upper mounting tube of the center mount rigging (Detail “B”).
4. Install the short quick-release pin through the link plate and into the center mount
footrest (Detail “A”).
5. Ensure all quick-release pins and the rigging pivot pin secure the center mount
footrest to the mounting bracket.
Manual Center Mount Footrests
1. Engage the release lever with one hand, hold the center mount footrest with the other,
and insert the center mount footrest into the mounting bracket of the seat frame.
All manuals and user guides at all-guides.com
