SECTION 4—SEAT/BACK
2 1
Removing/Installing different type of Backrests
Com for t backr es t (M echa nical an d Ga s st rut v er s ions)
NOTE: For this procedure, refer to FIGURE 4.9.
To Install the Comfort backrest; reverse this procedure from STEP 1 to 3.
1. Remove the back-cane bracket. Refer to Removing Back-cane Bracket paragraph.
2. Pull up on the seat upholstery.
3. Remove the two mounting screws and locknuts that secure the back-cane bracket
to the wheelchair frame.
4. Install the new set including the appropriate backrest upholstery and shell
(Refer to user guide to lock and unlock the complete backrest upholstery)
NOTE: Both back-cane brackets should be set to the same adjustment holes.
Backrest
Upholstery
Back-cane
Comfort Shell
Mounting
Screws
FIGURE 4.9
Comfort Backrests
Back-cane
Bracket