Invacare Cleveland, Руководство пользователя

Страница: 20 / 76

EN6 EN7
A
- Place the Velcro strips of the rear skirt on the base of the
frame.
For your safety, assure you of the good locking of the
backrest on the frame and verify the assembling by firing firmly
the backrest. If this last is staying in position, you can use your
lift-out chair.
Otherwise, restart the procedure of assembling of the back-
rest. If you doubt the good locking of the backrest, do not use
the lift-out chair and contact your distributor, there is a risk of
fall in case of bad assembling of the backrest.
Nota: To disassemble, position the backrest horizontally, pull
outwards on the 2 tabs (A) and take out the backrest.
2) Readying the armchair for use
Always position the lift-out chair on a completely flat
surface to ensure optimal stability during use.
5.3 Conditions for use
The Lift-out chair has been designed for use in the following
conditions:
Min Max Optimal
Temperature 5°C 40°C 20°C
Humidity 90% 60%
Use of the armchair is not recommended if there is a risk
of storms.
6. Operation of the Lift-out chair
The covering of this product is not designed to be fire-
resistant.
Do not smoke in this armchair if you have difficulty getting up
or if your mobility is impaired.
1) Do not operate this device without first reading and under-
standing this manual. If you have difficulty understanding the
warnings and instructions, contact your reseller before using
this equipment. Failure to do so may result in injury or mate-
rial damage.