Invacare Celt Plus, Руководство по техническому обслуживанию и запасным частям

Страница: 11 / 78

11/03 Page 2.3
MAINTENANCE
Scope
1 This chapter details the removal and/or replacement procedures required for the following assemblies and/or
items. It is not intended to be a strict policy of maintenance but should be used as a guide only.
2 The assemblies covered (refer to Fig 2.0) are as follows:
Section Assembly Page
2.1 Backrest Canvas/Pushhandles 2.7
2.2 Armrest Assemblies 2.11
2.3 Rear Wheel Assemblies 2.15
2.4 Brake Assembly 2.21
2.5 Castor Wheel Assemblies 2.23
2.6 Swing/Detachable Footrest Assemblies 2.25
2.7 Seat Canvas and Chassis 2.27
3 For the tools required refer to the list of tools detailed in paragraph 12. Any special tooling and/or torque
requirements will be referred to within the relevant text.
4 General engineering practices and safe working practices must be adhered to at all times.
5 For further information on the assemblies contained within this chapter, contact Customer Services,
INVACARE Ltd., (refer to address in chapter 1) quoting the following details:
5.1 Part Number
5.2 Description
5.3 Quantity required
6 For certain orders the following should also be quoted:
6.1 Serial or batch number
6.2 End user
7 For any ordering or spares procurement, contact INVACARE Ltd., (refer to address in Chapter1) quoting the
details in paragraphs 5 and 6.