1.
Fig. 4-11
Loosen and remove screws (3).
2.
Remove front lateral plates (2 and 4) from backrest (1).
3.
Fig. 4-12
Remove both Phillips screws
A
on middle plate.
4.
Shift position of rear plate halves (three settings are possible using drill holes).
•
Before pulling Flex3 backrest apart, a "1" will be visible in the small, rectangular cut-out.
•
After pulling Flex3 backrest apart, a "2" will be visible in the small, rectangular cut-out.
5.
Re-insert two screws
A
into middle plate.
6.
Retighten front lateral plates (2 and 4).
4.1.5 Adjusting Flex3 manual recline
Tools:
•
6 mm Allen key
A second inner hole line
B
allows fine adjustments of 3.75 °.
Bracket for seat width 53 is inrigged, see below.
Regular seat width
Seat width 53
1604311-G
11
Содержание AVIVA RX40
Страница 13: ...Setup 4 Insert four screws A 5 Tighten four screws 1604311 G 13...
Страница 43: ...Notes...
