SECTION 8—ARMS
Adjustable ASBA Seat
46
Part No 1143238
Adjusting the Height of the Cantilever Arms
NOTE:
For
this
procedure,
refer
to
FIGURE 8.4.
1. Adjust
the
angle
of
the
cantilever
arms
to
allow
access
to
the
hardware
that
attaches
the
mounting
brackets
to
the
back
canes.
Refer
to
Adjusting
the
Angle
of
the
Cantilever
Arms.
2. Loosen
the
three
screws
that
secure
the
back
cane
mounting
bracket
to
the
back
cane.
Repeat
to
loosen
the
opposite
back
cane
mounting
bracket.
3. Adjust
the
position
of
mounting
brackets
and
spreader
bar
up
or
down
the
back
cane
to
desired
height.
4. Tighten
the
screws
on
both
back
cane
mounting
brackets
to
secure
the
back
cane
mounting
brackets
at
the
desired
height
obtained
in
STEP
3.
5. Adjust
the
angle
of
the
cantilever
arms
to
accommodate
the
user.
Refer
to
Adjusting
the
Angle
of
the
Cantilever
Arms
on
page 47.
FIGURE 8.4
Adjusting the Height of the Cantilever Arms
Screws
(STEP 2)
Back Cane Mounting Bracket
Adjust angle of Cantilever Arm
(STEP 1)
