Invacare Action2 NG Скачать руководство пользователя страница 24

Страница: 24 / 48

SECTION 5—REAR WHEELS/FRONT CASTORS

2 4

Adjusting Quick-Release Axles

NOTE: For this procedure, refer to FIGURE 5.3.

1. Remove rear wheel and quick

release axle from the wheelchair. Refer to

Removing/Installing Rear Wheels paragraph.

2. Depress detent pin in the quick

release axle and slide the quick

release axle through

the rear wheel hub.

3. Release detent pin to ensure that the locking pins are fully released.

4. Increase or decrease end play by adjusting the locknut on the end of the quick

release axle.

W A R N I N G

Make sure the detent pin of the
quick release axle is fully released
BEFORE operating the wheelchair.

Keep locking pins clean.

5. Reinstall rear wheel onto the

wheelchair. Refer to
Removing/Installing Rear Wheels
paragraph.

6. Repeat STEPS 4

5 until the quick

release axle detent pins are fully
released past the wheelchair frame.

Replacing Handrims

NOTE: for this procedure, refer to FIGURE 5.4.

NOTE: To replace the handrim, use 8 new mounting pre-glued screws (M5).

1. Remove the rear wheel from the wheelchair. Refer to Removing/Installing Rear

Wheels paragraph.

2. Remove the mounting screws that secure the

existing handrim to the rear wheel.

3. Remove the existing handrim.

4. Install the new handrim and secure to

the rear wheel with the new mounting
pre-glued screws (M5).

5. The space between the rim and

handrim can be adjusted thanks to the
different length of the plastic spacers.

6. Reinstall the wheel to the wheelchair.

Refer to section 5, page 23.

7. Repeat for the opposite wheel

Quick-Release

Axle

FIGURE 5.3

Adjusting Quick-Release Axles

Locknut

Wheelchair Frame

Quick-Release

Axle Bracket

Plastic
spacers

Handrim

Mounting
screw (M5)

FIGURE 5.4

Replacing Handrims

Содержание Action2 NG

















































Результаты поиска

Содержание Action2 NG

Отзывы:

Похожие инструкции для Action2 NG

Бренды по названию

Популярные бренды

Invacare Action2 NG, Руководство по обслуживанию

Результаты поиска

Содержание Action2 NG

Отзывы:

Похожие инструкции для Action2 NG

Бренды по названию

Популярные бренды