Invacare Action 4NG series, Руководство пользователя

Страница: 55 / 72

Transport
7.6 Removing and fitting the powered 12” rear
wheels
CAUTION!
Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during
use. This can lead to overturning.
– Always ensure that the removable axles are
fully engaged whenever you fit a wheel.
The rear wheels may only be removed by an
attendant, not by the user.
This ensures that the rear wheels are only removed
if an attendant is available to secure the mobility
device and prevent risk of overturning.
The coupling rings for disengaging the motors are located
on the powered drive wheels, refer to Wheels and Driving
chapters, ALBER esprit user manual.
Removing the rear wheels
1. Switch off control unit.
2. Release cover B is pressed beyond the coupling ring.
3. Simultaneously rotate coupling ring
A
counterclockwise
as far as an “X” is displayed in the window C .
The powered drive wheel is now disengaged. Wheel
can be fitted or removed.
4. Perform step 2 to 3 on both sides.
Fitting the rear wheels
1. Engage the rear wheel completely into the adapter
sleeve and ensure that the torque plug is simultaneously
pushed into the torque socket.
2. Rotate coupling ring A until it reaches the middle stop.
3. Release cover B is flush with the coupling ring and “1”
is displayed in the window C .
The motor is now re-engaged. Wheel is in ”Power
Driven” mode.
1640502-B 55