background image

22

23

- Comfort seat (photo 18)

It is removable allowing the folding of the wheelchair ; 
simply lift the cushion and put it away, then grab the two seat 
holding tubes and pull them upwards. 
Repeat the operation in reverse order to unfold the wheel-
chair (see paragraph 2.1.1).

i

The padding and outer cover of this seat will wear; please 

contact your dealer for possible replacement.
Make sure the cushion is properly positioned on the 3 seat
Velcro fasteners to provide safety and comfort for the user. 
Keep your fingers away from movable parts to prevent injuries 
during folding and unfolding ! 

- Comfort backrest (photos 19 & 19A) 
It is made up of a rigid shell (A) and a preformed foam 
cushion (B) which is locked in place by Velcro fasteners thus 
providing optimal comfort. The backrest is removable to allow 
the folding of the wheelchair; loosen both buttons (C), slide 
the levers (D) to the inside and disengage the hooks (E) from 
their supports. Reverse the procedure to reassemble the 
backrest.

!

 It is recommended that this operation be performed 

only by the attendant. Always make sure that the backrest is 
locked in place for optimal safety of the user. 
Make sure the backrest cushion Velcro fasteners are in good 
state and well positioned. Keep your fingers away from mova-
ble parts to prevent injuries.

Note :

 for maintenance of your DARTEX

®

 cover, only use a 

soft rag soaked with alcohol.
- Comfort headrest (photo 20)
It is removable, completely loosen the ball screw (A). It is 
height adjustable, slightly loosen the ball screw (A), adjust to 
the desired height, tighten without forcing.
The cushion also is angle, depth and height adjustable by ope-
rating simultaneously the lever (B) and screws (C).

Note :

 make sure that the indexable lever is properly 

oriented to prevent any bother or injury to the user or 
attendant.

!

 Do not adjust the head rest when the user leans on it 

and check the mounting to the backrest in order to prevent 

injuries.

19

D

C

A

B

E

A

C

B

20

19A

Содержание Action 4





































Отзывы: